Kompernass KH 1149 - Manual (Page 5)

- 5 -
• Do not cover the air suction grill while operating the
appliance. Clean it at regular intervals.
• The Professional Hair Dryer becomes hot during
use. Hold it only by the grip when it is hot.
Intended Use
The Professional Hair Dryer is intended only for the
drying and shaping of human hair, under no circum-
stances is it to be used for wigs and hairpieces
made of synthetic material. You may use it exclusively in
domestic households. Pay heed to all of the informa-
tion in this operating manual, especially the safety in-
structions.
Delivery Contents
• Professional Hair Dryer KH 2113
• Styling Jet
• Finger Diffusor
• Operating manual
Description of the appli-
ance
q Styling Jet
w Filter element
e Air suction grill
r Suspension lug
t Blower level switch (2 levels)
y Heat level switch (3 levels)
u Cool level switch (“Cool-Shot”)
i Finger Diffusor
Operation
➪
Insert the plug into the wall socket.
➪
Switch the Professional Hair Dryer on with the
blower level switch
t .
The Professional Hair Dryer is fitted with two
function switches. With these you can separately
select the strength of the air flow (Blower switch
t )
and the amount of heat (Heat level switch y ):
Blower levels
0 The Professional Hair Dryer is
switched off
1 reduced air flow
2 full power air flow
Heat levels
1 Cold air flow
2 Low heating level
3 High heating level
With the cool level switch “Cool-Shot” u you can
produce a cooler air flow with every combination of
blower and heat levels.
➪
Switch the appliance off after use, in that you
place the blower switch
t into position “0”.
Then remove the plug from the wall socket.
Drying and styling hair
➪
To quickly dry hair, we recommend first of all
using a high blower and heater setting for a
short period. Afterwards, place the settings at a
lower level to shape and form the hair.
With the enclosed styling jet q , which can be
turned into all positions, you can use the air flow di-
rectly for styling.
IB_KH2113_E266_UK_LB4 21.08.2007 17:00 Uhr Seite 5