Cleaning, Troubleshooting, Disposal – Kompernass KH 1149 User Manual
Page 6
- 6 -
If you wish wish to dry your hair particulary
gently, or for the so-called “air-dryed permanent
wave”, use the finger diffusor
i
.
➪
For this, first of all remove the styling jet
q
, then
replace it with the finger diffusor.
➪
Before you comb your hair out allow it to cool,
so that the styling retains its form.
➪
For cooling the hair you can use the switch
“Cool-Shot”
u
or level 1 of the blower switch
y
settings.
ƽ
Attention!
First pack and transport the Professional Hair
Dryer when it has completely cooled down.
Otherwise, it could damage other items.
Cleaning
ƽ
Danger of electrical shock
Before cleaning the Professional Hair Dryer,
always remove the plug from the mains wall
socket.
Cleaning the housing
➪
To clean the housing, use a soft cloth moistened
with a mild soapy solution.
Cleaning the air suction grill and the
filter element
ƽ
Fire hazard!
Clean the air suction grill
e
and the filter ele-
ment
w
at regular intervals with a soft brush.
➪
Fold out the air suction grill
e
to the rear.
➪
Clean the filter element
w
and the openings of
the air suction grill
e
with a soft brush.
➪
Replace the filter element
w
and close the air suc-
tion grill
e
.
ƽ
Danger of electrical shock
Before using the Professional Hair Dryer again
after cleaning, it must be completely dry.
Troubleshooting
Should your Professional Hair Dryer not function as
expected, first remove the plug from the wall socket
and allow the appliance to cool down for a few minu-
tes. The appliance is fitted with an overheating protec-
tor! Should the appliance still not function when coo-
led down, consult the service.
Disposal
Do not dispose of the appliance in
your normal domestic waste.
Dispose of the appliance through an approved
disposal centre or at your community waste facility.
Observe the currently applicable regulations. In
case of doubt, please contact your waste
disposal centre.
Dispose of the packaging materials in an
environmentally responsible manner .
IB_KH2113_E266_UK_LB4 21.08.2007 17:00 Uhr Seite 6