KVH Industries TracVisionM5 - Manual (Page 24)

25
Example - Linear Satellite
The following is an example of programming a
linear user-defined satellite (USER 1).
Satellite Name: YOURSAT 123 at 7°W
Commands you would enter into the antenna via
HyperTerminal or KVH Flash Update Wizard:
HALT
DEBUGON
SATCONFIG,USER1,7,W,3,L
@DEBUGON
@SATCONFIG,A,98,11966,27500,34,0x0800,H,H,3
@SATCONFIG,A,98,11823,27500,34,0x0800,V,H,3
@SATCONFIG,A,98,00000,27500,34,0x0000,V,L,3
@SATCONFIG,A,98,00000,27500,34,0x0000,H,L,3
ZAP
Example - Circular Satellite
The following is an example of programming a
circular user-defined satellite (USER 1).
Satellite Name: YOURSAT 456 at 122°W
Commands you would enter into the antenna via
HyperTerminal or KVH Flash Update Wizard:
HALT
DEBUGON
SATCONFIG,USER1,122,W,3,C
@DEBUGON
@SATCONFIG,A,98,12225,20000,56,0x1004,R,U,3
@SATCONFIG,A,98,12456,20000,56,0x1004,L,U,3
ZAP
Transponder Data Value
Horizontal High
Frequency 11.966 GHz
Symbol rate 27500
FEC code rate 3/4
Network ID 2048 (dec) = 0x0800
Vertical High
Frequency 11.823 GHz
Symbol rate 27500
FEC code rate 3/4
Network ID 2048 (dec) = 0x0800
Vertical Low
No data listed
Horizontal Low
No data listed
Transponder Data Value
Right
Frequency 12.225 GHz
Symbol rate 20000
FEC code rate 5/6
Network ID 4100 (dec) = 0x1004
Left
Frequency 12.456 GHz
Symbol rate 20000
FEC code rate 5/6
Network ID 4100 (dec) = 0x1004
Continued... C