Adjusting the effects, Setting the reverb effect, Adjusting the effects setting the reverb effect – KORG CONCERT C-720 User Manual

Page 43

Advertising
background image

Editing sounds and performances > Adjusting the effects

41

Adjusting the effects

The C-720 is equipped with three types of effects:

The following diagram shows the effect’s routing:

Use the following parameters to select the reverb, chorus and
insert effects, and adjust how much of the sound must be pro-
cessed.

Setting the reverb effect

Reverb adds ambience to the sound. Either you are in Single,
Layer or Split mode, a single reverb effect is available for both
sounds (see diagram). A different amount of reverb can be ap-
plied to each sound, thanks to the Reverb Send parameter (see
below).

1.

After having pressed the EDIT button, use the SCROLL
button to go to the Reverb Type edit page, with the reverb
type selected:

Use the +/YES and -/NO buttons to select a different reverb.
See below the list of available reverb effects (a more detailed
list is on page 71).

2.

Press SCROLL

again to select the Reverb On/Off pa-

rameter:

Use the +/YES and -/NO buttons to turn reverb on or off.
This corresponds to the status of the REVERB indicator.

3.

Press SCROLL

to go to the Reverb Send edit page, with

the M (Main) parameter selected:

Use the +/YES and -/NO buttons to set the amount of
reverb applied to the Main sound (0 ~ 127).

4.

If you are in Layer or Split mode, press SCROLL

again

to select the L (Layer/Left) parameter:

Use the +/YES and -/NO buttons to set the amount of
reverb applied to the Layer/Left sound (0 ~ 127).

5.

Press the EXIT button to return to the Main page and save
the changes (see “Exit from the Sound edit mode” on
page 38), or the SCROLL

button to go to the next edit

page (see below).

Effect

Meaning

IFX (Insert Effect)

The sound pass entirely through this effect.
This is used for effects being part of the
sound itself, like the phaser of the rotary
speaker. There is a separate IFX for each of
the sounds.

Rev (Reverb)

This effect adds ambience to the sounds. In
Layer or Split mode, there is a single reverb
for all selected sounds.

Ch (Chorus)

This effect adds modulation to the sounds.
In Layer or Split mode, there is a single cho-
rus for all selected sounds.

0DLQ 6RXQG

/D\HU/HIW 6RXQG

,); 

,); 

&KRUXV

5HYHUE

&KRUXV 6HQG

5HYHUE 6HQG

&KRUXV 6HQG

5HYHUE 6HQG

:HW'U\

:HW'U\

Reverb

Hall 1

Hall 2

Hall 3

Wet Plate

Dry Plate

Room 1

Room 2

Bright Room

Reverb Type 3

Hall 1 On

Reverb Type 3

Hall 1 On

Reverb Send 4

M:127 L:100

Reverb Send 4

M:127 L:100

C720_English.fm Page 41 Tuesday, October 10, 2006 4:14 PM

Advertising