KTM 950 - Manual (Page 69)

TROUBLESHOOTING
»
68
If you let the specified maintenance work on your motorcycle be carried out, disturbances can hardly be expected. Should an error occur
nevertheless, we advise you to use the trouble shooting chart in order to find the cause of error.
We would like to point out that many operations cannot be performed by oneself. In case of uncertainty, please contact a KTM-dealer.
TROUBLE CAUSE REMEDY
Engine does not start when the
starter button is actuated
Operating errror
Discharged battery.
Blown fuse IGNITION.
Blown main fuse.
Defect ignition lock
Defect safe-starting system.
Turn on the ignition, switch the gear to neutral
Recharge the battery and investigate the causes for discharg-
ing; contact an authorized KTM workshop.
Replace fuse IGNITION
Remove the seat and replace the main fuse in the starter relay
Check ignition lock, contact an authorized KTM workshop.
Contact an authorized KTM workshop.
The engine cranks only with pulled
clutch lever
A gear is engaged
A gear is engaged and the side
stand is still folded down
Defect safe-starting system.
Shift the transmission to neutral.
Shift the transmission to neutral.
Contact an authorized KTM workshop.
Engine cranks with gear engaged. Defect safe-starting system. Contact an authorized KTM workshop.