Kyocera K126C - Manual (Page 31)

User Guide for the Kyocera K126C Phone 23
Retrieving text messages
When a text message is received, your screen displays
“1 New Text Message(s)”, along with the
symbol at
the top of your screen. The symbol flashes if the
message is urgent.
If you see “1 New Text Message(s)”
You can choose to:
•
View the message — Press .
• Ignore the message — Press right, then
press .
Note: If you receive a new message while you are
reading a message, the one you are reading will be
replaced by the new one. You can find the older
message in the Inbox:
Select
Menu
→
Messages
→
Inbox .
If you see the symbol
If the symbol is flashing, the message is urgent.
1. Select Menu
→
Messages .
2. Select Inbox (1) to see a list of all your
received messages.
New, unread messages appear in
bold .
indicates an “Urgent” or “Emergency” message.
3. Press up or down to scroll through the list
of messages.
4. Press to read a message.
Reading the message
The options available to you may vary. Check with your
service provider.
Note: Sounds embedded in text messages will not play if
the phone is set to Silent Mode.
1. If the text message is long, press down to view
the entire message.
2. When you are finished, you can Reply to the sender,
Erase the message, Save the message to your Saved
folder, or set additional Options for the message:
– View Sender information.
– Save New Address to save the sender’s phone
number or email address in your Contacts list.
– Forward to forward the message.
– Reply with Copy to reply to the message with a
copy of the original attached.
– Save AutoText to save the text from the message
as AutoText, which you can insert into other
messages. Graphics and sound will not be saved
as part of AutoText.(For more about AutoText,
see page 25.)
82-G1858-1EN.book Page 23 Tuesday, April 3, 2007 11:41 AM