Kyocera K126C - Manual (Page 9)

User Guide for the Kyocera K126C Phone 1
1 G
ETTING
S
TARTED
Installing the battery
Your phone comes with a removable lithium ion
(LiIon) battery.
1. Hold the phone with the back
facing you.
2. Unsnap the battery door by
sliding your fingernail into the
recess located at the bottom of
the battery door.
3. Place the battery in the phone
casing with the metal contacts
toward the bottom of the
phone.
4. Place the tab at the top of the
battery door in the opening at
the top of the battery well.
5. Press the battery door until it
snaps into place.
Charging the battery
You must have at least a partial
charge
in the battery to make or
receive calls. Fully charge the
battery before using the phone.
To charge the battery, connect the
AC adapter to the jack on the
bottom of the phone, then plug the
adapter into a wall outlet.
The battery icon in the upper-right corner of the screen
tells you whether the phone is:
• Charging (the icon is animated)
• Partially charged
• Fully charged
Recharging the battery
You can safely recharge the battery at any time, even if it
has a partial charge.
82-G1858-1EN.book Page 1 Tuesday, April 3, 2007 11:41 AM