KVH Industries KVH TracVision - Manual (Page 9)

Installation
54-0239 TracVision A5 Shop Manual © 2004 KVH Industries, Inc., All rights reserved.
Do not connect the receiver directly to the vehicle’s battery
without following these additional steps:
• Install a protective fuse (6 amps) within 18" of the battery.
• Install a relay, switched from the ignition, between the battery and
the receiver.
• Use fire-resistant AWG 8 wire from the relay to the battery.
Connecting to Power (cont’d)
Effective April 2004
Subject to change without notice
VEHICLE POWER
(10-16 VDC)
VHF ANTENNA IN
S-VIDEO
TO KVH ANTENNA TO VIDEO
SATELLITE IN
AUDIO R AUDIO L VIDEO
RF REMOTE INPUT OUT TO TV COMPOSITE VIDEO
TO IRD
SATELLITE IN
DIAGNOSTIC PORT 1 DIAGNOSTIC PORT 2
Ground
Fuse
(6 Amp)
Vehicle
Battery
+12 VDC
Ground
Switched
Relay
Ground
Ignition
Ground
AWG 8
Wire
Pillar Ground Screw
+ –
TracVision A5 Receiver
Fuse
(6 Amp)
Supplied Cable