KVH Industries TracVision 4 User Manual
Technical manual, Kvh tracv ision
Advertising
Table of contents
Document Outline
- Welcome Page
- Table of Contents
- 1 - Introduction
- 2 - Installation
- 2.1 - Planning the Installation
- 2.2 - Mounting the TracVision Antenna
- 2.3 - Connecting the IRD(s)
- 2.4 - Wiring the Switchplate
- 2.5 - Mounting the Switchplate
- 2.6 - Activating/Programming the IRD
- 2.7 - Installing Satellites to Track
- 2.8 - Setting the Skew Angle (European Systems Only)
- 2.9 - Checking Out the System
- 2.10 - Changing Geographic Location
- 3 - Troubleshooting
- 4 - Maintenance
- 4.1 - Warranty/Service Information
- 4.2 - Preventive Maintenance
- 4.3 - TracVision 4 Field Replaceable Units
- 4.4 - Replacing the Main PCB and Fuses
- 4.5 - Replacing the RF PCB
- 4.6 - Replacing the Antenna Gyro Assembly
- 4.7 - Replacing the Elevation Motor and Belt
- 4.8 - Replacing the LNB
- 4.9 - Preparing for Shipment
- Appendices
- Warranty Page