KVH Industries TracVision 4 - Manual (Page 43)

2.10 Changing Geographic Location
If you move to a different geographic area, you will need to
modify your TracVision 4 system to receive satellite TV signals in
the new location. To begin receiving satellite signals in the new
area, perform the following steps.
Swap LNBs
To receive the proper satellite signals in the new geographic
location, your TracVision antenna must be equipped with the
appropriate LNB for that location. If moving to the U.S., you will
need to install a North American-style LNB; if moving to Europe,
you will need to install a European-style LNB. Table 2-12 lists the
part numbers for ordering these LNB options.
Part Name Part Number
European-style LNB Replacement Kit 02-1033-02
North American-style LNB Replacement Kit 02-1033-01
With the new part, you will receive a simple instruction sheet for
swapping the LNBs.
Install New Satellites
When you move to a new area, the list of available satellites
changes. If you’re moving to the U.S., you will need to choose a
new satellite pair from the list of available North American
satellites (see Table 2-6). If you’re moving to Europe, you will
need to choose a new satellite pair from the list of available
European satellites (see Table 2-7). For details on installing these
new satellites, refer to Section 2.7, “Installing Satellites to Track” on
page 28.
Replace the IRD
In order to receive satellite TV service in your new geographic
location, you will need to purchase an IRD designed for that
location. Refer to your satellite TV service provider for more
information.
Installation
54-0150 39
Table 2-12
LNB Part Numbers
You may also need to replace your
television when changing
geographic location. In North
America, your TV must support the
NTSC video standard. In Europe,
your TV must support the PAL
video standard.