KTM ENDURO SUPERMOTO 640 LC4 - Manual (Page 37)

ENGLISH
36
MAINTENANCE WORK ON CHASSIS AND ENGINE
»
Exchanging the headlight lamp (LC4 Supermoto)
Removing the headlight mask:
Remove the left and right screws [1] and the speedometer cover.
Detach the headlight mask and tilt towards the front.
Replacing the headlight lamp:
Pull the plug [2] off the bulb
Remove the rubber cap [3]
Turn the lamp base [4] approx. 30° in a counterclockwise direction and pull
out of the socket.
When inserting the new bulb make sure that the wider of the 3 blades [5] fits
firmly in the respective socket recess.
NEVER TOUCH THE GLASS OF THE BULB WITH YOUR FINGERS. THE GLASS OF
THE BULB MUST REMAIN ABSOLUTELY FREE FROM GREASE. HEAT WILL OTHER-
WISE CAUSE THE GREASE TO EVAPORATE AND SETTLE DOWN ON THE
REFLECTOR.
To mount, proceed in the reverse order.
Mounting the headlight mask:
Fit the headlight mask in the respective brackets.
Mount the speedometer cover and screws [1].
Replacing the parking-light bulb (LC4 Supermoto)
Disassemble the headlight as described above and simply pull the bulb socket
[6] out of the reflector.
2
1 1
3
6
4
5