Kingston Technology KND2410TX - Manual (Page 25)

Appendix E Warranties and Notices 19
KND2410TX User’s Guide - Rev. A01 Kingston Technology Company
F.C.C. Certification
This device has been tested and found to comply with limits for Class A digital
device, pursuant to Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received; including
interference that may cause undesired operation
.
CE Notice
The official CE symbol indicates compliance of this Kingston Technology product
to the EMC directive of the European Community. The CE symbol indicates that
this Kingston product meets or exceeds the following standards:
❑ EN50081-1 “Electromagnetic Compatibility-generic emissions standard”
EN55022: “Limits and methods of measurement of radio
interference characteristics.”
❑ EN50082-1 “Electromagnetic Compatibility-generic immunity standard”
IEC 801-2: “Electrostatic discharge requirements”
IEC 801-3: “Radiated immunity requirements”
IEC 801-4: “Electrical fast transient requirements”
❑ EN60950 “Low Voltage Directive (LVD)”
❑ Declaration of CE Conformity in accordance with the above standards has
been made and is on file at Kingston Technology.
C-Tick Certification
AS/NZS 3548 “Information Technology Equipment”
Declaration of C-Tick Conformity in accordance with the above standards
has been made and is on file at Kingston Technology.
N1298