Messages and responses – Kyocera SL300R User Manual

Page 125

Advertising
background image

7-3

7

Appe

ndix

The camera gets hot.

A strong current flows through the

camera when the LCD monitor is used

so the camera gets hot if the LCD

monitor is used for an extended

period.

While this is not a fault, you should

leave the camera for a time before

using it again.

The caution LED

flashes slowly.

The flash is charging.

Briefly take your finger off the shutter

release button and wait.

The caution LED

flashes quickly.

This is the camera shake warning.

The shutter speed is slow.

Place the camera on a stable surface

to take the picture.

The camera will not

focus. The shooting

mark flashes.

The subject is a type that is not suited

to autofocus. ( p.3-2)

Use focus lock to focus on a strongly

contrasting part of the subject, then

compose the shot and take the

picture. ( p.3-2)

The picture came out

completely white.

The image is overexposed.

Set LONG EXP to OFF or reset the

camera settings.

I can’t rotate or protect

the image or specify

DPOF settings.

The SD memory card is write-

protected.

Release the write-protection for the

card. ( p.1-4)

Messages and Responses

Message

Cause

Response

MEMORY CARD

FULL

There is not enough recording space

available on the memory card.

Insert a new memory card or erase

some unwanted images. Alternatively,

changing the image size or quality

may enable you to take the picture.

NO CARD

There is no memory card inserted.

Insert a memory card.

WRITE PROTECT

The SD memory card is write-

protected.

Release the write-protection for the

card ( p.1-4) or use another memory

card.

CARD ERROR

or

UNSUPPORTED

FORMAT

You are using a card that was

formatted on another device.

Format the memory card in the

camera. ( p.6-5)

The format of the memory card is not

compatible with this camera.

Insert a new memory card or format

this memory card.

The card is not inserted correctly.

Re-insert the memory card.

NO IMAGE

Nothing is recorded on the memory

card.

Insert a memory card that has been

used to take pictures.

Problem

Cause

Solution

Finecam_E.book Page 3 Thursday, August 28, 2003 6:21 PM

Advertising