Kenwood TK-380 - Manual (Page 18)

13
TRUNKED OPERATION (Trunking Format)
■ Placing a Dispatch Call
1 Select the desired system and group using the
encoder and the System or Group keys.
2 Press the PTT switch.
3 If a tone does not sound, communication is
possible; start speaking into the microphone.
Release the PTT switch to receive.
• For best sound quality at the receiving station, hold
the microphone approximately 1.5 inches (3 ~ 4 cm)
from your mouth.
■ Receiving a Dispatch Call
1 Select the desired system and group using the
encoder and the System or Group keys. (If the
Scan function has been programmed, you can
switch it ON or OFF as desired.)
2 When you hear the dispatcher’s voice, readjust
the volume as necessary.