Specifications – Kenwood VR-5080 User Manual
Page 58
52
Specifications
Chapter Five : Warnings and Specifications
Video Section
Video Inputs / Outputs
Video (composite) ............................................. 1 Vp-p / 75
Ω
S Video (luminance signal) ............................... 1 Vp-p / 75
Ω
(chrominance signal) .................. 0.286 Vp-p / 75
Ω
Component (luminance signal) ....................... 1 Vp-p / 75
Ω
(P
B
/P
R
-signal) ............................. ±0.324 Vp-p / 75
Ω
FM Tuner Section
Tuning Frequency Range ........................... 87.5 MHz ~ 108 MHz
Usable Sensitivity (Mono)
.................... 1.2
µ
V (75
Ω
) / 12.2 dBf (75 kHz dev., sinad 30 dB)
50dB Quieting Sensitivity
Stereo ............................................... 22.4
µ
V (75
Ω
) / 38.2 dBf
Total Harmonic Distortion (1 kHz)
Mono ................................................... 0.3 % (71.2 dBf input)
Stereo ................................................... 0.5 % (71.2 dBf input)
Signal to Noise Ratio (1 kHz, 75 kHz DEV.)
Mono ................................................... 75 dB (71.2 dBf input)
Stereo .................................................... 70 dB (71.2 dBf input)
Stereo Separation (1 kHz) ................................................. 40 dB
Selectivity (+400 kHz) ....................................................... 70 dB
Frequency Response ................ 30 Hz ~ 15 kHz, +0.5 dB, -3.0 dB
AM Tuner Section
Tuning Frequency Range
10kHz step ............................................. 530 kHz ~ 1,700 kHz
Usable Sensitivity (30 % mod., S/N 20 dB)
........................................................................... 16
µ
V / (500
µ
V/m)
Signal to Noise Ratio (30 % mod. 1 mV input) ............... 50 dB
IR In/Out Section
IR Receiver In Terminal
Maximum Output Current ............................................. 20mA
Operating Voltage ............................................................... 12V
Output Impedance ........................................................... 470
Ω
IR Out LCD Remote Terminal
Maximum Output Current ............................................. 20mA
Operating Voltage ................................................................. 5V
Output Impedance ........................................................... 470
Ω
IR Repeater Out Terminal
Maximum Output Current ............................................. 20mA
Operating Voltage ............................................................... 12V
Output Impedance ........................................................... 470
Ω
SHAPE OF PLUG TO BE CONNECTED:
IR IN/OUT SPECIFICATION:
General
Power consumption ............................................................... 5 A
AC outlet Switched ............................ 2 (total 90W, 0.75 A max.)
Dimensions ................................................ W : 440mm (17-5/16”)
..................................................................... H : 191mm
(7-1/2”)
..................................................................... D : 416mm
(16-3/8”)
Weight (Net) ..................................................... 15.0 kg (33.0 lb)
Terminal
IR Receiver In
IR Out LCD
Remote
To Tip
Signal
Signal
To Ground
Ground
To Sleeve
+12V
Ground
IR Receiver In and IR Out
LCD Remote
IR Repeater Out
Stereo mini plug
Mono mini plug
Sleeve
Sleeve
Ring
Tip
Tip