Kenwood VR-5080 - Manual (Page 13)

7
Chapter One : Connecting Your Devices
Connections
Connecting Your Speakers, continued
Do not plug in the amplifiers or the receiver to AC power
until all connections have been made.
What if I Have a Powered Subwoofer?
Simply connect the subwoofer’s audio cable to the receiver’s
SUBWOOFER PRE OUT jack as shown to the left.
To Connect Surround Back Speakers:
To reproduce the surround back channels of THX Surround
EX, DTS-ES or DTS-NEO:6, you need to use a 2-channel
power amplifier to power the surround back speakers.
To connect the surround back speakers:
1. Using RCA audio cables (not supplied), connect the
receiver’s SURROUND BACK PRE OUT jacks to the 2-
channel power amplifiers’ input jacks as shown to the
left.
2. Connect the speakers to the power amplifier according
to the amplifiers’ instruction manuals.