Kenwood VR-5080 - Manual (Page 9)

3
Chapter One : Connecting Your Devices
Connections
Noting Your Devices
Use this table and the diagram on the preceding page to
plan your connections before you make them, or use it to
record your connections as you make them.
For VR-5080;
If you will be connecting a DVD player or other compo-
nent with a digital output, please refer to the following chart
before choosing a video jack set:
You will need this information later, when you set up your
Remote control unit (see “Identifying Components for Re-
mote Control Unit” on page 39). Recording this informa-
tion now will save you additional trips behind your home
entertainment cabinet. You will fill in the Setup Code col-
umn when you are setting up Remote control unit.
Jack Set Device Manufacturer Model # Setup Code
PHONO
CD1
MD/TAPE1
CD2/TAPE2 MONITOR
CD-R
VIDEO1
VIDEO2
VIDEO3
VIDEO4
DVD
MONITOR OUT
(TV on Remote Control unit)
( VR-5700/
VR-5090 only )
coaxial DVD, VIDEO2 or 3
optical DVD
If your digital
cable is... Choose this jack
set...