Kambrook Banquet Frypan KEF16 - Manual (Page 2)

2
Kambrook Safety
Welcome to Kambrook and your new
Banquet Frypan. At Kambrook we believe
that the safe performance of our products
is the first priority in any consumer product
so that you, our valued customer, can
confidently use and trust our products.
We ask that any electrical appliance that
you use be operated in a sensible fashion
with due care and attention placed on the
following important operating instructions:
READ ALL INSTRUCTIONS
THOROUGHLY BEFORE
ACTIVATING THE APPLIANCE
AND RETAIN THEM FOR FUTURE
REFERENCE.
Ensure that the power source to be used
is the same as the voltage requirements of
the product.
Switch off at the power outlet and then
unplug and remove the Temperature
Control Probe when the appliance is not
in use and before cleaning.
Allow all parts to cool before dissembling
for cleaning.
Never immerse the power cord, plug or
temperature control probe in water or
any other liquid.
Before inserting the Temperature Control
Probe into the Frypan socket ensure the
interior of the socket is fully dry.To do
this, shake out excess water then wipe the
interior of the socket with a dry cloth.
Do not touch hot surfaces, use handles
or knobs
This appliance is not intended for use by
young children or infirm persons without
supervision.
Young children should be supervised to
ensure that they do not play with the
appliance.
Do not leave the appliance unattended
when in use.
Always use the appliance on a dry, level
surface
Do not let the cord hang over the edge of
a table or counter, touch hot surfaces or
become knotted.
Do not place this appliance on or near a
hot gas or electric burner, or where it
could touch a heated oven
This appliance is for household use only.
Do not use this appliance for other than
its intended use. Do not use outdoors.
Extreme caution must be taken when
using this appliance filled with hot oil or
other liquid. Do not move during cooking
and allow to cool before removing oil or
other liquid.
The installation of a residual current
device (safety switch) is recommended to
provide additional safety protection when
using electrical appliances. It is advisable
that a safety switch with a rated residual
operating current not exceeding 30mA be
installed in the electrical circuit supplying
the appliance. See your electrician for
professional advice.
Regularly inspect the power cord,
plug and actual appliance for any
damage. If found damaged in any
way, immediately cease use of the
appliance and return the entire
appliance to the nearest authorised
Kambrook Service Centre for
examination, replacement or repair.
Please call 1800 800 634 for
Kambrook Service Centre details.