Krown Manufacturing 200 - Manual (Page 13)

II
11
USING YOUR KROWN 200
HELP MENU
For your convenience, a quick reference Help Menu has been preprogrammed in the Krown 200.
To access the Help Menu:
The Help Menu is displayed
and printed out.
Simple, easy to follow directions
for placing a call will be
displayed and printed.
To exit the Help Menu:
You may now use your
Krown 200 to make or
answer a call
HOW TO MAKE A TDD CALL BY USING ACOUSTIC CUPS
1. Turn on the Krown 200
The Krown 200 display window will show TDD ON.
2. Place telephone receiver down firmly in the rubber
acoustic cups with telephone cord on the LEFT.
3. If the phone light is on and steady, there is a dial tone.
Dial the telephone number now on your telephone, not
on the Krown 200. If the phone is not steady nor flashing
your phone extension may be in use by someone else.
4. Watch the Phone Light after you dial the number. If the
light shows:
1) SLOW FLASHING = Telephone is Ringing at the number dialed.
2) FAST FLASHING = Line is Busy at the number dialed.
3) IRREGULAR FLASHING = (1) Your call cannot be completed as dialed. Hang up,
check number and try again, or call the TDD Operator for assistance.
(2) The number is voice only. (3) Your call has been answered by the an
answering machine.
5. The incoming messages are printed in upper case (CAPITAL) letters. Outgoing messages
are printed in lower case (small) letters.
CTRL + H
HELP MENU
SELECT OPTION 1-8
2
PLACING A CALL
8
PLACING A CALL