Kenwood KTC-D500E - Manual (Page 24)

24 KTC-D500E
Connect the monitor and power as follows.
– +
+
B
C
A
Ignition key switch
ACC
Car fuse box
Car fuse box
(Main fuse)
Battery
 C
 B
 A
To AV input of the monitor Î
Fuse (5A)
Fuse (3A)
Ground wire (Black) - (To car chassis)
Battery wire (Yellow)
Ignition wire (Red)
To the center unit
such as a DVD
receiver.
ÅıÇ
Set C position when connecting by
Kenwood TV Interface Cable. Set S position when connecting
by AV Cable (RCA).
Wiring harness 3
TV Interface Cable 5
• 75Ω
• F connector
• For VHF/UHF
Digital TV Tuner 1
Connection
⁄
Connection of antenna with booster
amplifier
Set "0/5 Volt" ON when connecting an
antenna with booster amplifier to this unit.