Krown Manufacturing KVT100 User Manual
Page 11
ELECTRONIC VOICE
The Electronic Voice is a single unchangeable voice message that is stored in the memory of your TDD. The
message is used for calling hearing people at a VOICE/TDD number. It tells them by electronic voice: “Please
use TDD for hearing-impaired caller.”
The voice message will be repeated until your TDD conversation begins (when your TDD receives a signal
from another TDD). As soon as the other person begins to type, the electronic voice message stops.
To turn the Electronic Voice ON or OFF
• Press CTRL-SPACE BAR to turn your Electronic Voice on. The message:
“VOICE ON”
will appear on the display.
• Press CTRL-SPACE BAR to turn your Electronic Voice off. The message:
“VOICE OFF”
will appear on the display.
NOTE: It is recommended to set electronic voice off when not dialing to a voice/TDD number. Turn your elec-
tronic voice off before using any control key operations.
BATTERY POWER INFORMATION
KVT100 is designed to operate from battery or AC (house electricity) power. To use the battery power, unplug
the AC charger/adapter from the KVT100.
9
CHAPTER 1: GETTING STARTED