Krown Manufacturing KVT100 - Manual (Page 23)

Press the number you wish to dial. If you make a mistake, use the backspace to erase and type a correct
number. After you enter all numbers, press RETURN key to start the dialing process. The number you entered
will be dialed.
You can press CTRL-9 to disconnect. The display will show:
“DISCONNECTED”.
The phone line is now hung up and you may press DIAL key and begin dialing again.
MEMORY DIALING
To dial from the directory, press DIAL. The display shows:
“TYPE NO.,M(MEM)”
If you press “M” for directory dialing,
“PH#1#-#9#, D(DIR)” appears.
Choose the directory number you wish to dial or press “D” to list all numbers in the directory on the screen.
CALL PROGRESS INDICATORS
After the number is dialed, the Visual touch Braille display will be cleared to prepare for the call progress. The
first cell will be used for call progress indicator.
• If you notice a period of 2 second on and 4 second off raise up or down on the first cell, it is ringing.
• If you notice a cycle of 1 second on and 1 second off instead, it is busy.
CHAPTER 4: DIRECT CONNECT
21