Kyocera KM-2540 - Manual (Page 89)

Troubleshooting 6-7
Time for maintenance. — Periodic maintenance is
required to keep your machine
in good condition. Contact your
Service Representative or
Authorized Service Center
promptly. —
Paper misfeed. — If a paper jam occurs, the
location of the jam will be
indicated on the touch panel and
the machine will stop. Leave the
machine switched on (| position)
and follow the instructions to
remove the jammed paper. page 6-8
Remove paper from inner tray of
Finisher. Is there any paper left in the
optional document finisher? Remove all paper left in the
optional document finisher. —
Staple jam. Is the optional document finisher
or built-in finisher experiencing a
staple jam? Remove the jammed staple. page 4-5
Refer to the
optional Document
Finisher Operation
Guide.
System error.
Call service. Is it re-displayed after opening
and closing the front cover,
turning off and on the main
power switch, and plugging out
and plugging in the power plug
in the power outlet? Make a note of this message (C
followed by a number). Turn off
the machine ( position),
unplug the power cord, and
contact your Service
Representative or Authorized
Service Center. —
Paper cassette is out of order.
Select another paper cassette.
(Paper cassette is out of order.
Select other paper cassette.) — The cassette in use has a
problem and is temporarily
unavailable. Contact your
Service Representative or
Authorized Service Center
promptly. To continue copying,
use another cassette. —
System error.
Main Power Switch Off / On. — A system error has occurred.
Turn the main power switch off
and on again. —
Please wait.
Remote edit.
(Please wait.
Remote editing.) Is Job account editing being
done from a network connected
computer? Copying is not possible until
editing is complete. —
Error Messages Checkpoints Corrective Actions Reference Page