Kodak SD-63HK - Manual (Page 25)

25
Playback procedure
Basic playback
Place a disc onto the disc tray.
Hold the disc, position it with the printed label
side up, align it with the guides, and place it in
its proper position.
Preparation:
• Turn ON the TV and select to the corresponding video input.
1 Press (ON/STANDBY).
(If the unit is in FM/AM mode, press DVD/FM/
AM to select DVD mode.)
“Reading” display will change to “No Disc”.
(If DVD disc has already loaded, playback will
start automatically.)
welcome
No Disc
Press PLAY or OPEN/CLOSE.
The disc tray closes automatically.
On the screen display, “
” changes to
“Reading” and then playback commences.
2
4
3
Press OPEN/CLOSE.
The disc tray will open.
For 12cm disc For 8cm disc
Notes:
• If a non-compatible disc is loaded, “Incorrect Disc”, “Region
Code Error” or “Parental Error” will appear on the screen ac-
cording to the type of loaded disc. In this case, check your disc
again (see pages 6 and 23).
• Some discs may take a minute or so to start playback.
• When you insert a disc with the label facing downwards (ie. the
wrong way up) and press PLAY or OPEN/CLOSE on the unit,
“Reading” will appear on the display and then “Incorrect Disc”
will be displayed.
• Some discs may not work the resuming facility.
• Resuming cannot function when you play a PBC-featured Video
CD while the PBC is on. To turn off the PBC, see page 31.
• Some playback functions of DVDs may be intentionally fixed
by software producers. This unit plays DVDs in accordance
with the design intent of the software producers. Some play-
back features may not be available. Also refer to the instruc-
tions supplied with the DVD.
• A menu screen will appear on the TV
screen, if the disc has a menu feature.
Press
/ or / to select desired title,
then press ENTER or PLAY.
The title is selected and play commences.
Press STOP to end playback.
To stop playback, press STOP.
Then press OPEN/CLOSE.
The disc tray opens.
Remove the disc then press
(ON/
STANDBY).
The disc tray closes automatically and unit turns
off.
6
7
Resuming facility
• The unit memorizes the stop location, “ ” ap-
pears on the screen. Press PLAY to resume
playback (from the stopped location).
• If you press STOP again or unload the disc (“ ”
appears on the screen.), the unit will clear the
stopped location from its memory.
Adjust the volume by rotating Volume knob on
the front panel or VOL +/– on the remote con-
trol. 5
2D20401A P24-31 26/9/03, 6:02 PM 25