Kompernass HAIRDRYER KH1803 - Manual (Page 4)

- 2 -
• Do not take the hair dryer into use if it has fallen
down or is damaged in any way. Arrange for
the appliance to be checked and, if necessary,
repaired by qualified technicians.
• Do not cover the ventilation grill when using the
appliance. Clean it at regular intervals.
• The hair dryer becomes hot when it is in use.
Hold it only by the grip when it is hot.
Intended use
This hair dryer is intended only for the drying and
shaping of human hair, under no circumstances is it
to be used for wigs and hairpieces made of synthetic
material. This hair dryer is intended for domestic
use only. Pay heed to all of the information in this
operating manual, especially the safety instructions.
Items supplied
• Hair Dryer KH 1803
• Styling Jet
• Finger Diffusor
• Operating Instructions
Appliance description
q Styling jet
w Air suction grill
e Heat level switch (3 levels)
r Blower level switch (2 levels)
t Suspension eye
y Cool level switch (“Cool-Shot”)
u Finger Diffusor
Operation
➪ Insert the plug into the wall socket.
➪ Switch the hair dryer on with the blower level
switch r .
The hair dryer is fitted with two function switches.
With these you can separately select the strength
of the air flow ( Blower switch
r ) and the level of
heat (Heat level switch e ):
Blower levels
0
The hair dryer is switched off
I reduced air flow
II maximum air flow
Heat levels
•
cold air flow
•• lower heat level
••• maximum heat level
With the cool level switch “Cool-Shot” y you can
produce a cooler air flow with every combination of
blower and heat levels.
➪ After use, switch the appliance off by moving the
blower switch
r into the position “0”.
Then remove the plug from the wall socket.
Drying and styling hair
➪ To quickly dry hair, we recommend first of all
using a high blower and heater setting for a
short period. Afterwards, place the settings at
a lower level to shape and form the hair.
With the enclosed styling jet q , which can be turned
to all positions, you can studiously use the air flow
for styling.
If you wish to dry your hair particulary gently, or for
the so-called “air-dryed permanent wave”, use the
finger diffusor
u .
➪ For this, first of all remove the styling jet q , then
replace it with the finger diffusor.
➪ Before you comb your hair out allow it to cool,
so that the styling retains its form.
➪ For cooling the hair you can use the switch
“Cool-Shot”
y or level • of the heat level switch
e .
IB_KH1803_E26167_LB6 05.02.2009 16:23 Uhr Seite 2