Kompernass HAIRDRYER KH1803 - Manual (Page 5)

- 3 -
ƽ
Attention!
First pack and transport the hair dryer when it
has completely cooled down. Otherwise, it
could damage other items.
Cleaning
ƽ
Danger of electrical shock
ALWAYS remove the plug from the power socket
before cleaning the hair dryer.
Cleaning the housing
➪ To clean the housing, use a soft cloth moistened
with a mild soapy solution.
Cleaning the air suction grill
ƽ
Risk of Fire!
Clean the air suction grill w at regular intervals
with a soft brush.
➪ Press the air suction grill w together, from above
and below, so that you can release it from the
hair dryer.
➪ Clean the openings of the air suction grill w
with a soft brush.
➪ Insert the upper securing lug of the air suction
grill
w into the guide on the hair dryer. Then
press the lower securing lug into the hair dryer
until the air suction grill
w audibly engages.
ƽ
Danger of an electrical shock!
After being cleaned, the hair dryer must be com-
pletely dry before using it again.
Troubleshooting
Should your hair dryer not function as expected,
first remove the plug from the wall socket and allow
the appliance to cool down for a few minutes.
The appliance is fitted with an overheating protector!
Should the appliance still not function, consult the
service department detailed on the Warranty card.
Disposal
Do not dispose of the appliance in your
normal domestic waste. This product is
subject to the European guideline
2002/96/EC.
Dispose of the appliance through an approved dis-
posal centre or at your community waste facility.
Observe the currently applicable regulations.
In case of doubt, please contact your waste disposal
centre.
Dispose of all packaging materials in an
environmentally responsible manner.
Technical data
Mains voltage: 220-240 V~ 50 Hz
Nominal power: 2200 W
Protection class: II /
IB_KH1803_E26167_LB6 05.02.2009 16:23 Uhr Seite 3