Kodak EasyShare 350 User Manual
Page 35
Troubleshooting
www.kodak.com/go/support
29
Bluetooth light
Light status
Cause
Action/solution
Light off
Photo printer not ready to accept image.
Press Bluetooth button.
Light glows steady
Photo printer ready to accept image.
None required.
Light blinks
Image being received by the photo printer.
None required.
Cartridge light
Light status
Cause
Action/solution
IMPORTANT:
The cartridge may lock if there is a paper error. Clear
the paper error and make sure the Paper light is off
before attempting to remove the cartridge (see Paper
light under
Light off
Cartridge properly installed and
working normally.
None required.
Light glows steady red Cartridge depleted or
uninstalled.
Load new cartridge (
press On/Off button.
Cartridge incorrectly loaded or
seated.
Remove and re-load cartridge
(
), then press On/Off button.
Light blinks
Light blinks concurrently with
Paper light: corrupt or invalid
image file.
None required.