Konica Minolta BIZHUB PRO 1050E - Manual (Page 132)

Using the Network Scanner Features 7
bizhub PRO 1050/1050e Scanner 7-19
Usin
g th
e Net
w
o
rk Sca
n
n
e
r
F
e
at
ur
es
Chapter 7
7.5 Transmission to the SMB server
When you send the scanned data to an SMB server, necessary procedures
depend on whether the SMB server is registered in advance or it is input
manually.
!
Detail
Refer to the following pages.
"When an SMB server is Already Registered"..................... p.7-19
"When an SMB server is Input Manually"............................ p.7-22
When an SMB server is Already Registered
1
Select the [SCAN] tab.
The Select Destinations/Storage
Locations screen appears.
2
Press the [SMB] key.
– In the initial settings, the Select
Destinations/Storage Loca-
tions screen (E-Mail) is dis-
played. For information on the
initial settings of the SCAN tab,
contact your administrator of
the copier.