Konica Minolta BIZHUB PRO 1050E - Manual (Page 16)

Introduction 1
bizhub PRO 1050/1050e Scanner 1-11
In
tr
od
uc
ti
on
Chapter 1
1.3.4 How to read this Manual
6 Configuring Destination for the Network Scanner Features
6.2 Registering an E-Mail Address
When using the function to send the scanned data as an E-Mail attached file,
you can register the destination E-Mail address in advance. The registration
is done in the following steps.
!
Detail
For E-Mail/FTP/HDD/SMB, destinations can be registered as many as
500 in sum.
1
Select the [SCAN] tab.
he Select Destinations/Storage
Locations screen appears.
2
Make sure that [E-Mail] is select-
ed.
In the initial settings, the Select
Destinations/Storage Loca-
tions screen (E-Mail) is dis-
played. For information on the
initial settings of the Scan
screen, contact your adminis-
trator of the copier.
If the E-Mail address is
already registered, the Name
is dis-played.
In the initial settings, such in-
dex keys as [A-C] and [D-F]
are displayed.
On how to edit/delete a regis-
tered address, contact your
administrator of the copier.
3
Press the [Manual Address] key.
6-4 bizhub PRO 1050/1050e Scanner
The Destination Manual Input screen appears.
Chapter 6
Configuring Destination for the Network Scanner Features
This page does not exist in the document.
Reminder!
Explains important notices
on operating procedures.
[ ] are used for the terms
displayed on the screens.
Detail
Hints and Advices on
operating procedures.
Note
Explanations to supplement
the body.
Memoes may be included in
the body.
Describes operating
procedures.
Show an object and feature
of a procedure.