Kathrein Twin-PVR Satellite UFS 821si - Manual (Page 100)

100
Note: If you are not sure whether you want to download new software to
your receiver, you can first activate the “information text” and then start
the download. Only the information text is displayed. If you want the
changes the new software offers, you can then still run the download as
described above.
Software and Programme List Update
Transponder Info
The transponder frequency and symbol rate are displayed here.
Current SW Version
The current software version is displayed here.
Download Information Text
Use the  buttons to select whether you want to download the
latest information text. The information text is displayed during the
software download, providing details of the new features offered by the
software update.
Download channel data
Use the

buttons to select whether you want to download the
latest channel list.
Download Firmware
The software currently available on the transponder is displayed here.
Compare the version with the one listed under “Current SW Version”.
If the version on the transponder is higher than the current version
on the receiver, use the
 buttons to select whether you want to
download the latest software.
Start Downloading
When you have made all the settings, press  here to start the
download. The following display appears (see next page):