Kathrein Twin-PVR Satellite UFS 821si - Manual (Page 118)

118
Using the Front Panel
If you have misplaced your remote control, or if the batteries are empty,
you can still operate your receiver from the front panel.
Backup Operation
The front panel houses four buttons and the multifunction control
(from now on referred to as “the control”).
Menu button:
Press the Menu button to access the main menu. Move to the various
sub-menu items by rotating the control. Select the sub-menus by
pressing the middle of the control. Press the Menu button to exit the
selected menu and save your changes. Press the Stop/Exit button to
exit the menu.
Record button:
Press the Record button to start a manual recording. Select the setting
by rotating the control. Press the middle of the control to make your
settings. Press the Stop/Exit button to exit the menu without recording
the current programme.
Play button:
Press the Play button to access the recording list. Select the programme
you want to view by rotating the control and start playback by pressing
the middle of the control. Press the Stop/Exit button to exit the menu
without starting playback.
Stop/Exit button:
Used to cancel all ongoing actions, such as Record and Play.
Multifunction control:
- Rotate the control to switch channels.
- Tap the middle of the control to call up the volume bar, then rotate the
control to adjust the volume.
- Press the control button twice to switch between TV and radio
reception.
- Press and hold down the control button to switch the receiver to
Standby mode. Tap the control button to restart the receiver.
Because there are no
number buttons, no
password/PIN-protected
functions can be called up.