Kyocera Strobe K612b - Manual (Page 19)

User Guide for the Strobe Phone 11
2 M
AKING AND
A
NSWERING
C
ALLS
Phone calls
Making a call
Make sure you are in an area where a signal
can be received. Look for the
symbol on the
home screen. The more bars you see in this
symbol, the stronger the signal. If there are no
bars, move to where the signal strength is better.
When the phone has been idle for a time, it
changes to power save mode. When you see your
phone’s screen dim, press any key to return to
normal operating mode. The following
instructions apply to either the number keypad
(flip closed) or the QWERTY keypad (flip open),
unless otherwise stated.
Entering a number
1. On a keypad, enter the phone number and
press .
2. Press to end the call.
Using voice dialing
Voice dialing requires that a contact be saved with
a voice tag. See page 58.
1. Press and hold to initiate voice dialing.
2. Say the name of the contact when prompted.
The phone places the call.
3. Press to end the call.
Answering a call
When a call comes in, the phone rings, vibrates,
or lights up, and an animated icon appears.
The phone number of the caller also appears if it
is not restricted. If the number is stored in your
Contacts directory, the contact name appears.
• Press
to answer the incoming call.
-or-
• Press to answer the incoming call and
turn on the speakerphone.
Adjusting the volume during a call
• To adjust the earpiece volume during a call,
press the side volume keys up
or down.
Silencing an incoming call
• Press or the left softkey to
select Silence .
Note: In the absence of voicemail, this feature
drops the call.
- or -
• Press then press to answer
the call.
This action silences the current call only. The next
call rings as normal.
82-N8758-1EN.book Page 11 Wednesday, May 10, 2006 2:01 PM