Kyocera Strobe K612b - Manual (Page 20)

12
Redialing a number
• To redial a recent call, press twice to
open your recent calls list. Highlight a phone
number or name and press
.
Tip: To redial the last number called,
received, or missed, press
three times.
Calling a saved number
If you have already saved a phone number, you
can use the Contacts list to find it quickly.
1. From the home screen, press the right softkey
to select Contacts .
2. Scroll down the list to find the contact you
want to call.
3. Highlight the name and press to dial
the number.
Using the speakerphone
Your Strobe phone has a built-in speakerphone.
• To turn on the speaker, press . If you
press during an incoming call alert,
you answer the call.
The
icon at the top of the phone screen
indicates that the speakerphone is on.
• To turn off the speakerphone, and
press .
Setting the phone to hold calls
The Hold Call feature allows you to place
incoming calls on hold until you are ready to
answer them.
1. Select Menu
→
Settings
→
Convenience
→
Hold Call
→
Enabled .
– If you have not recorded a hold message,
you are prompted to record one, such as
“Please hold. I’ll answer in a minute.”
2. Record the message twice, as prompted.
3. Select Save or Options
( Play , Re-Record , or Exit ).
The next time a call comes in, you will have the
option of placing it on hold.
Placing a call on hold
You can place a call on hold once you have
enabled this feature.
Note: If you are already on a call and you receive
another call, you cannot place the incoming call
on hold. It goes to voicemail.
1. When a call comes in, press the right softkey
to select Options
→
Hold Call . The
caller is placed on hold and hears your
recorded hold message.
2. To speak to the caller, select Answer .
- or -
To hang up without speaking to the caller,
select
End Call .
82-N8758-1EN.book Page 12 Wednesday, May 10, 2006 2:01 PM