Kicker SX700.4 - Manual (Page 15)

29
SX .4 Series Amplifiers
Opera
tion
UNLOCK AMPLIFIER - cont.
If you enter the wrong code the display will flash the mes-
sage BAD CODE and return you to the UNLOCK screen.
Press the ENT key to enter your
lock your code again.
Enter your code again making sure to place the correct
character in the correct position in the display. Blank spaces
count as part of the code so be sure you are entering it
correctly.
Press the HOME key and try again. If you have found your
error then the amp will unlock. If not, the flashing BAD CODE
will greet you and you can try again.
If you have tried several times (several is defined as more
than 3...less than 10) and you still can not unlock your
amplifier, this more than likely means means you have
forgotten your lock code.
You will need to call KICKER directly at (405) 624-8583 to
handle this situation. You will need your amplifier’s serial
number AND your receipt as the guys and gals answering the
phone will need this information from you to help you out.
So...before you call, gather this information up and have it
ready to save us some time on the phone. Cool? Cool!
Better yet, take the time RIGHT NOW to fill out the first page
in this manual and STAPLE your receipt to it. That way if or
when you need service (like forgetting your lock code) you will
have all the information you need right there in front of you.
SYS
MEM-1
GAIN EQ LPF HPF KOMP
AMP1
LOCK
MEM-2 MEM-3 MEM-4
PHASE
MUTE
AMP2
LEFT RIGHT
bad code
SYS
MEM-1
GAIN EQ LPF HPF KOMP
AMP1
LOCK
MEM-2 MEM-3 MEM-4
PHASE
MUTE
AMP2
LEFT RIGHT
unlock
HOME ENT ESC
28
SX .4 Series Amplifiers
Opera
tion
Security MENU - Here you can lock down your amplifier to
prevent any access to the settings. The DEFAULT screen is still
active and you can select any of the four presets... but that is
it!
Use the UP and DOWN keys to
select LOCK IT UP or DON’T LOCK
and then press the ENT key to
accept your setting.
If you selected LOCK IT UP the display will now show
UNLOCK . The controls are now locked out.Press the ESC
key to return to the DEFAULT scrolling screen.
If you selected DON’T LOCK then you will return to the
MAIN menu and the amplifier will remain unlocked.
NOTE...
While your amplifier is in lock down you will notice the LOCK
indicator on the ISIS VFD display is lit. This indicates your
amplifier is locked down and will require a code to unlock it
before any adjustments can be made.
HOME ENT ESC
UNLOCK AMPLIFIER
You do remember your lock code right? You better because
that is now the only way in! If you have not changed it then it
is still at the factory default of
123 .
To unlock your amplifier press the
ENT key. The display will show
UNLOCK . Press the ENT key again.
You will now enter your code to
unlock the amplifier.
The ESC and ENT keys move the
blinking cursor left or right to select
which character to enter.
Use the UP and DOWN keys to
enter the character.
( A , B , C ... 1 , 2 , 3 ...etc)
When you are finished press and hold
the
HOME key for 1.5 seconds to
enter your unlock code.
If the code is correct the amp will unlock and drop you back
into the MAIN menu. If not, then read on...
HOME ENT ESC
HOME ENT ESC
HOME ENT ESC
HOME ENT ESC
2 Times