Keys Fitness 1-2 Person Sauna BS-9101 - Manual (Page 12)

15) Preparation
Plug the unit into a grounded (3-prong) outlet (120V 60Hz). The sauna is ready to be used.
Read and follow all OPERATING INSTRUCTION.
SAUNA OPERATION
NOTE: Before powering on the sauna for the first time, please check and confirm the connection of
all wiring (CONTROL BOX, HEATERS, TEMPERATURE SENSOR etc.) are correct and
undamaged.
CONTROL PANEL FUNCTION
Figure 30
Power On /Off:
Press to control the main power of the sauna unit.
Power indicator:
Indicates the status of the sauna’s main power.
Work Start/Stop:
Press to control the working functions of the sauna.
Work indicator:
Indicate the working status of the sauna.
Heat indicator:
Indicate the status of heating functions.
Light:
Press to control the lighting function
Time Display:
Display the heating time of the sauna in minute(s)
Time:
Press to adjust the setting of the timer.
Temperature Display:
Display the actual interior temperature of the sauna room in 0 C/ 0 F.
Temperature:
Press to adjust the temperature setting
0
C/
0
F:
Press to change the temperature display between 0 C or 0 F.
1. MAIN POWER:
Plug in the main power to your household power.
2. SAUNA POWER:
To power on the sauna, press POWER ON/OFF one time on the inside control
panel, POWER light should then light up, The TIME DISPLAY will flash 60. TEMPERATURE
DISPLAY will flash 60. If you press POWER ON/OFF again, power is off, while everything goes out.
3. HEATING TIME:
When power is on, press TIME “▲” or “▼” to increase or decrease the emitting
time of sauna room. When you press one time, it increases or decreases 1 minute. If you press the