Kompernass KH 2360 - Manual (Page 18)

- 16 -
8.4 Playback procedure for a memory
card:
If you have correctly inserted a memory card or a
USB memory stick into the SilverCrest DVD player
and pressed the button
USB/CARD/DVD 1@ on the
remote control, the player automatically recognizes
the folders and data that exist on the memory medium.
These will be displayed on the screen in the players
data browser and, as is described in chapter 14,
are handled in exactly the same way as a DVD/
CD medium.
9. Use
• Carry out the required connections as described
in chapter 7 and provide a power supply.
9.1 Switching the device on and off
in the standby mode
• Set the switch POWER 4! to the position ON to
switch the DVD player on.
The LCD monitors turn on and the background image
appears.
If no disc is inserted into the disc tray the notice
LOADING
will appear briefly followed by the prompt
NO DISC .
• To switch the device to standby mode press the
button POWER q on the remote control.
The Power LEDs 4* on the LCD monitors light up. In
this condition the device can again be switched on
via the button
POWER q on the remote control.
• To switch off the DVD player altogether, set the
switch POWER 4! to the position OFF.
9.2 Display settings
• Press the button TFT-MODE 3) to access the display
settings. The settings can be accessed at any
time.
• Select with the navigation buttons 1^ 1* one
of the inputs Contrast (Contrast), Hue (Hue),
Saturation
(Saturation) and Sharpness (Sharp-
ness).
• With the navigation buttons 3! o you change
the value.
• To exit the settings press the button TFT-MODE 3)
again.
9.3 Setting the image format
• Set the switch SCREEN 5$ on each LCD monitor
either to 4:3 or 16:9 to set the image format of the
LCD monitors.
IB_KH2360_V5256_UK.qxd 31.08.2007 13:49 Uhr Seite 16