Kodak 2.5.5 - Manual (Page 14)

10 oXYgen Scan Version 2.5.5 Release Notes
Producing a Gray Image from a Black-and-white or Color Original
To produce a gray image from a black-and-white or color original, you can use
either of the following input profiles:
• Tr_ES_Gray: For use with transparent originals
• Ref_ES_Gray : For use with reflective originals
Scanning Black-and-white or Color Negative Originals
In the Setup dialog box, select the following options:
• Type: Transparent
• Mode : Color RGB 16 bit or Color RGB 8 bit
• Media : Negative
• Intent : Balanced
• Input Profile : Tr_ES_Gray
• Film Type: AutoBWDefault
Note: R, G, and B values may not be equal. The input profile converts these values to
grays.
Note: If you are producing a color output, in Intent make sure to select Vivid.