Kodak 2.5.5 - Manual (Page 15)

11
Defining a Crop Area for Analysis
You can specify that only part of the crop is used for the crop analysis. If you do not
use this option to define a crop area, the default for the crop analysis is 90%.
1. Select Setup>Operations Modes or on the keyboard press C MD +K.
2. In the Operation Mode Preferences dialog box, select the Define Area for Crop
Analyze check box.
3. In the W box (width or x-axis) and in the H box (height or y-axis), enter a
value from 40% to 100%.
4. With the Preview window open, press S HIFT to display the image area
currently designated for crop analysis.