Kodak DC4800 - Manual (Page 46)

38
Setting Picture Sharpness
Use the Sharpness setting to highlight or blend the edges of the subject in
pictures.
1 Set the Mode dial to a Capture setting (P,
2.8, 5.6, or 8).
2 Press the Menu button to display the
Capture Menu screen.
3 Press a button until the
icon is highlighted.
4 Press OK to display the Sharpness screen.
5 Press a button to highlight the
Sharpness setting you want to use.
m SHARP—increases contrast on the edges
of the image. Ideal when you want to
improve the clarity of an image, or if you
later may want to crop or cut out specific
areas in the picture.
m STANDARD (default)—use when no
special effect is needed. Ideal for everyday
pictures.
m SOFT—softens the edges of the image,
creating a “soft focus” effect.
6 Press OK to accept the changes and return to the Menu screen.
7
Press Menu to exit the Menu screen.
This setting remains until you change it.
/
/