Kodak DC4800 - Manual (Page 88)

80
Camera
Problem Cause Solution
Picture is not clear. The lens is dirty. Clean the lens. See Appendix.
Subject too close
when taking
picture Stand at least 1.6 ft (0.5 m) in
Wide angle, 3.3 ft (1 m) in
Telephoto.
Subject or the
camera moved
while the picture
was taken. Hold camera steady until the
picture is taken.
The subject is too
far away for the
flash to be effective. Move so the subject is less than
10 ft (3.0 m) away.
Slide show does not
run on external video
device. Video-Out setting is
incorrect. Adjust the camera Video-Out
settings (NTSC or PAL). See
page 57.
Slide show does not
run on LCD screen. Power Save is on. Turn off Power Save feature.
See page 52.
Use AC adapter to save battery.