Operation instruments, English – KTM 250 XC-F User Manual
Page 7
A
B
C
OPERATION INSTRUMENTS
»
Hand brake lever
The hand brake lever
[3] is mounted on the handlebars on the right and
actuates the front wheel brake. The adjusting screw
[B] can be used to change
the basic position of the hand brake lever (see "Maintenance").
Combination switch (EXC)
The light switch has 2, respectively 3 switch positions.
[A] = Light off (this function is not available in all models)
[B] = Low beam on
[C] = High beam on
You may use button
[5] to actuate the horn.
The red short circuit button
[6] serves to switch off the engine. Leave the
switch pressed until the engine stops.
3
B
4
Short circuit button (XC)
The short circuit button
[4] turns off the engine. When pressing this button,
the ignition circuit is short-circuited.
ENGLISH
6
5
6
Clutch lever
The clutch lever
[1] is located on the left side of the handlebar. The adjust-
ing screw
[A] is used to change the original position of the clutch lever (see
maintenance work on chassis and engine).
The clutch is hydraulically actuated and adjusts itself automatically.
1
A