Kingston Technology Bay Networks 2000 - Manual (Page 36)

Managing the Switch 29
Remote User Static IP Address
Enter an IP Address to be assigned to this user when establishing a PPTP
tunnel session. Note that this IP Address is unnecessary if you assign user IP
addresses from either a DHCP server or an internal address pool.
Administrator
The Administrator Settings allow you to change the Primary Administrator
User ID (UID) and Password. The Primary Administrator User ID and
Password combination always has access to all displays and controls. This
UID is also used to access the serial port and the recovery disk.
Note that there can be only one Primary Administrator.
User ID
Enter an appropriate User ID for the Primary Administrator. This UID has
the privileges to modify and view all controls in the Switch.
Password
Enter a user Password for the Primary Administrator.
NOTE : Do not use a password of 16 pound signs (#).
Confirm Password
Reenter the assigned password for the Primary Administrator to verify that
you have typed the intended password correctly.
Date and Time
Date
Enter the current month, day, and year (mm/dd/yy).
Time
Enter the current hour, minute, and seconds (hh:mm:ss) as displayed by a
24-hour clock (00:00:00 to 23:59:59).