Keystone Computer Keyboard - Manual (Page 16)

TimeMed Labeling Systems, Inc. - Call Toll Free: 800-323-4840 or visit www.timemed.com 1
Keyboard and the PC (COM 2)
baUd: 57,600
PariTy: none
daTa biT: 8
SToP biT: 1
ShaKe: Xon/Xoff
Keyboard Internal DIP switches
Default
Datamax M-Class/Z: Both switches are set toward the connector cord
Datamax I-Class: Both switches should be set away from the connector cord
instructions to change the communication settings for the printer (M-4206)
• Turn on the printer
On the front panel, press the “Menu” button (which is also the left arrow button).
You will see the “User Menu” with various options. Use the Up and Down buttons to scroll
to “System Settings” and press the “Enter” button once.
• You will see “Menu Mode” selected; press the “Enter” button once. Scroll down to the
“Advanced Menu” option and press the “Enter” button once.
• You will now be back in the main menu. Press the “Menu” button once. Using the “Down
arrow” button, scroll down to the “Communications” option and press the “Enter” button
once. The “Serial Port A” option will be highlighted, press the “Enter” button once.
• Scroll through the Communication options and press the “Enter” button for each to verify
that the settings are correct.
baUd raTe: 9,600
ProToCoL: boTh
PariTy: none
daTa biTS: 8
SToP biTS: 1
When you have confirmed each Communication option, press the “Left arrow” button to go back.
When you are done, press the “Left arrow” button three times to exit to the main menu.