Konica Minolta E500 - Manual (Page 25)

EN-24
Setting Image Resolution and Quality
As you get to know the digital camera, you can set the image resolution (number of vertical and
horizontal pixels) and image quality (compression ratio) based on the types of images you want to shoot.
These settings affect the number of images that can be stored in memory, or on a memory card.
Higher resolution and higher quality images provide finer detail but cause the images’ file size to be larger.
To change image resolution or image quality, perform these steps below:
1. Rotate the mode dial to , P , , , or and turn your
camera on by pressing the ON/OFF button.
2. Press the MENU button.
„ The [PICTURE] menu is displayed.
3. Use T to select [IMAGE SIZE], then press the button.
4. Use
S
or
T
to select the desired setting, then press the
button to confirm.
5. Follow the step 3 and 4 above to set the [QUALITY].
„ The possible number of shots and recording time depend on the storage size, resolution and quality settings and
the subject of the image to be captured.
„ You can resize the images later. (Please refer to the section in this manual titled “ Resizing an Image ” for further
detail.)
1 / 4
IMAGE SIZE
2048 X 1536
1280 X 960
640 X 480
2560 X 1920
1 / 3
NORMAL
FINE
ECONOMY
QUALITY