Kambrook ARCTIC KFA835 - Manual (Page 7)

7
Using Your Kambrook Arctic Remote
Controlled Tower Fan
Before First Use
Remove any promotional material
from the fan.
IMPORTANT: When
unpacking the fan, check
to see you have received
all the items listed in the
Parts List, before discarding
the packaging.
Assembling Your Arctic
Remote Controlled
Tower Fan
Base Assembly
1. Turn the Tower body upside down,
and remove the fastening screws
from the bottom of the tower.
2. Thread the power cord through
the half base (a) square opening.
Position the half base (a) onto
the support posts, located on the
bottom of the tower body.
Fig. 1
3. Pull and place the power cord
across the already positioned
half base (a), positioning it into
the cord track. Then align the
other half base (b) over the
support posts, and slightly over the
already positioned half base (a).
Firmly push down on the half base
(b) until the bases are locked in
place and flush. (Fig. 2)
Fig. 2
4. Secure the joint base to the Tower
Body with the fastening screws.
5. Check the power cord is still
located in the cord track.
6. Turn the tower over to the upright
position, it is now ready for use.
(a) (b)