Using the remote control – Kambrook ARCTIC KFA835 User Manual

Page 9

Advertising
background image

9

NATURE:

Random speed cycles (90-second cycles)

REDUCTION:

Speed cycles (90-second cycles) Speed steps down

every 30 minutes for MED and HIGH settings.

Pre-select speed / (LOW)

speed

Pre-select speed / (MED)

speed

Pre-select speed / (HIGH)

speed

variation speed

variation

speed

variation

speed

variation

speed

variation speed

variation

speed

Pre-select speed / (LOW)

Pre-select speed / (MED)

Pre-select speed / (HIGH)

Once a fan speed setting is selected,

press the MODE button once to

activate the NATURE setting. The

fan will now alternate between the

pre-selected setting, all lower settings

and OFF.
To switch the NATURE mode off, press

the MODE button twice, until the

indicator light disappears.
The REDUCTION mode allows you to

decrease the fan speed over time.
Once a fan speed setting is selected,

press the MODE button twice to

activate the REDUCTION setting. After

30 minutes, the selected setting will

drop to the next lowest setting. For

example if the fan speed is set at

MED, after 30 mins it will drop down

to LOW, and remain on LOW until the

unit is turned off.
To switch the REDUCTION mode off,

press the MODE button once. The fan

will now be in normal operation.

Using the Remote Control

The remote control buttons operate

in the same way as those on the fan

control panel.
Your remote control takes 2xAAA

batteries, and can be conveniently

stored in the compartment on the

rear housing of the unit.

Advertising