Kenwood KNA-DV3200 - Manual (Page 31)

English 31
Navigation Set Up
You can alter the map display conditions, the route guidance conditions and show the system
information.
1 Select .
2 Select (Navigation Set Up).
The NAVIGATION SET UP screen appears.
Select a setting button while changing the screen using or .
(User Settings):
Allows you to change the settings for the screen display and sound
(see page 32).
(Quick POI Selection):
Allows you to select the categories that are displayed when the
menu is selected from the Current Position screen (see page 33).
(Volume):
Perform settings for voice guidance and adjust the volume (see
page 33).
(2D/3D View):
Allows you to switch between a 2D and 3D map display screen
(see page 34).
(Calibration):
Allows you to correct any error in the display of the vehicle’s
position or direction (see page 35).
(Set Clock):
Set the clock (see page 37).
(Navigation Information):
Allows you to confirm the version of the map disc and the signals
from the vehicle (see page 36).
(Restore System Defaults):
Restore the system settings to their original condition (i.e., upon
factory shipment) (see page 37).
(Remote Control):
Register user-setting keys for the remote control (The remote
control is an optional extra.) (see page 54).
Setting Navigation System
KNA-DV3200(E)_ENG r2.1 04.7.23 4:32 PM Page 31