Kyocera 7135 Smartphone - Manual (Page 10)

8 Kyocera Wireless Corp.
=pÉêá~ä=jçÇÉã=pÉíìé =jçÇÉã=pÉíìé=dìáÇÉ=Сзк=нЬЙ=hóçÅÉê~=TNPR=лг~кйнЬзеЙ
sÉêáÑóáåÖ=нЬЙ=белн~ддЙЗ=ЗкбоЙк=Скзг=táåÇçïë=VU
1. From your desktop, right-click on
jу=`згймнЙк and choose mêçéÉêíáÉë.
2. Select
aÉîáÅÉ=j~е~ЦЙк and select sáÉï=ЗЙобЕЙл=Ду=нуйЙ.
In the Modem section, a Kyocera device should appear. If not, the device has not been
successfully installed.
sÉêáÑóáåÖ=нЬЙ=белн~ддЙЗ=ЗкбоЙк=Скзг=táåÇçïë=OMMM
1. From your desktop, right-click on
jу=`згймнЙк and choose mêçéÉêíáÉë.
2. Select
e~кЗп~кЙ and then aÉîáÅÉ=j~е~ЦЙк.
In the Modem section, a Kyocera device should appear. If not, the device has not been
successfully installed.
råáåëí~дд~нбзе=зС=нЬЙ=ЗкбоЙк=Скзг=táåÇçïë=VU
1. Keep your device connected to the Windows 98 system.
2. Go to the Device Manager, highlight your USB device and click
oÉãçîÉ.
3. Disconnect your USB device.
4. Go to C:\Windows\inf\directory and remove
ЗкоЗ~н~KÄáå and ÇêîáÇñKÄáå.
5. Go to C:\Windows\inf\Other and remove
hvl`bo^=tfobibpp=`lomKãÇãâïÅKáåÑ
and
hvl`bo^=tfobibpp=`lomKâïÅãÇãVUKáåÑ.
råáåëí~дд~нбзе=зС=нЬЙ=ЗкбоЙк=Скзг=táåÇçïë=OMMM
1. Keep your device connected to the Windows 2000 system.
2. Go to the modem section of the Device Manager and highlight the USB modem.
3. Go to the
^Енбзе menu and highlight råáåëí~ääKKK
4. Disconnect your USB device.
5. Go to C:\Windows\inf\directory and browse through the oem*.inf files and find the
one belonging to the USB device.
6.
Remove the OEM’s
mkc and fkc files.
The standard Microsoft USB Driver binary <usbser.sys> is required on Host PCs
(Windows 98 and Windows 2000) for successful usage of USB. If this file is missing, it
is likely that a Windows error message, “Invalid Driver” will appear. This can be found
on the Windows 98 SE CD.
For more information, please refer to:
http://www.microsoft.com/hwdev/resources/hwservices/WDMmodem.asp .