Kyocera 7135 Smartphone - Manual (Page 9)

Kyocera Wireless Corp. 7
jçÇÉã=pÉíìé=dìáÇÉ=Сзк=нЬЙ=hóçÅÉê~=TNPR=лг~кнйЬзеЙ Serial Modem Setup
8. You will then see a Windows alert for “Digital Signature Not Found”. Please ignore
this and click
vÉë to continue.
9.
Click
cáåáëÜ.
10.
You should now be able to see the Kyocera Modem listed under Modems tab.
Click
lh.
eÉäéÑìä=Ьбенл
• Your computer may not ‘recognize’ your USB cable until you perform your first
synchronization. Follow the on-screen instructions.
• Install the USB drivers
ДЙСзкЙ connecting your USB cable to your computer. If you
connect the USB cable to your computer before installing the drivers, it may cause
the drivers to be installed in an incorrect location on your computer.
•
^дп~ул reboot your computer after installing USB drivers, adding a modem, or
creating a dial-up networking connection.
• Make sure the phone is on and the HotSync cradle is firmly connected.
•
kçíÉW=The FaxModem MUST be running on Kyocera 7135 for the verification of the
installed drivers and the unistallation of the device.