Kawasaki PVS2970S - Manual (Page 14)

E - 13
Notes:
• Make sure to use the correct Audio/Video
cable, connecting the plugs incorrectly
may cause a weak signal.
• If you have a stereo VCR, make sure you
set it to stereo mode.
• Due to copyright protection, DVD movies
cannot be copied. If you copy a DVD movie
onto a videotape, the resulting copy will
be unclear, with poor sound quality. This
is NOT caused by a defective DVD
system.
CONNECTIONS
Listening to another audio equipment
1. Turn on the Unit.
2. Turn on your audio equipment and follow
the instructions provided with it to select
the AUDIO IN or DIGITAL IN function.
Connecting to a Surround Sound System
Right / Left side of unit for DISC A / B
Using Headphones / Earphones
• Turn down the volume before connecting the Headphones / Earphones. Slowly raise the volume with the
headphones / earphones on until you reach your desired volume.
• When headphones / earphones are connected to the monitors, the speakers will be disabled.
Bottom of Monitor
Headphones / Earphones
(3.5mm diameter plug)
Note:
When headphones / earphones are connected to the main unit, the speakers will be disabled.
Headphones / Earphones
(3.5mm diameter plug)
Rear side of Main unit (DISC A / B)
Audio equipment with
digital audio input jack
DIGITAL IN
COAXIAL
COAXIAL DIGITAL
AUDIO CABLE
Caution:
• Listening to audio at an excessive volume
can permanently damage your hearing.